HGW65HC Detailed Technical Parameters
1. Structure and dimensions
Component dimensions: rail height (HR) 53mm, slider height (H) 90mm, horizontal spacing of mounting holes (B) 142mm, vertical spacing (C) 110mm.
Rail width: 63mm (WR), rail fixing bolt specification M16 × 50mm.
Slide length: 170mm (W), standard pitch of guide rail (P) 150mm.
2. Load capacity
Dynamic load (C): 208.36kN, suitable for high-speed reciprocating motion scenarios.
Static load (C0): 303.13kN, supporting high static load requirements.
Static rated torque:
Rolling direction torque (MR) 9.38kN · m
Pitch moment (Mp) 7.38kN · m
Yaw moment (My) 7.38kN · m.
3. Installation and adaptation
Pre compression level: Provides three levels of pre compression options: light, medium, and heavy, suitable for different rigidity requirements.
Accuracy level: Available in ordinary (C), high (H), and precision (P) levels, with a maximum positioning accuracy of micrometers.
Dustproof design: standard rubber seals, optional metal partitions or high dust-proof kits (increased resistance by 0.6~4.0kgf).
4. Materials and Properties
Material of guide rail/slider: hardened steel (HRC58-62), surface chrome plated, with a 30% increase in wear resistance.
Friction coefficient: as low as 1/50 of sliding rails, supporting high dynamic motion (such as 3D printing, CNC machining).
5. Other parameters
Weight: A single slider weighs 12.89kg, and the guide rail weighs 21.1kg per meter.
Applicable temperature range: -30 ℃~+80 ℃. Lubricating grease should be regularly replenished in high temperature environments.
Note: During installation, it is necessary to ensure that the parallelism of the guide rail is ≤ 0.02mm/1000mm to avoid exceeding the torque limit due to unbalanced load